PINSA broches d'isolation auto-adhésives
These self adhesive pins are suitable for fastening insulation blankets to square or rectangular air ducts.
The PINSA has been manufactured out of galvanized steel. The PINSA consists of a pin and a foot. The foot has been provided with a synthetic rubber tack coat. Clips are automatically delivered with the pins. The clip is going to be fastened to the PINSA after attaching the installation blanket. In consequence of this the blanket will stay in the correct position. Extra clips (PINSACLIP) are available as well.
sécurité
Protective caps (PINSACAP) for attaching round the pin are available to the pins. (the protective caps must be ordered separately). The use of PINSACAP is always recommended where people can be injured by projecting pins.
fastening
The best result will be achieved on a dry, fat-free and dust-free surface.
|
Spécifications
|
|
|---|---|
| matériel broche et base: | acier galvanisé |
| couche adhésive: | caoutchouc synthétique |
| tenue en température: | -40 °C à 80 °C |
valeur maximale: |
100 °C pour une courte période de temps |
| longueur broche: | 19 - 165 mm |
| dimension de base: | 50 x 50 mm |
| nombre par m² | 10 - 12 pieces |
|
Spécifications PINSA CLIP |
|
|---|---|
| matériel: | acier galvanisé |
|
Spécifications PINSA CAP |
|
|---|---|
| matériel: | nylon |
|
Spécifications techniques
|
|
|---|---|
Spécification Néerlandaise |
|
Spécification Allemande |
|
Spécification Anglaise |
|
Images de produits
|
|
|---|---|
|
Classements
|
||
|---|---|---|
indisponible |
 |
 |
 |
 |
|---|---|---|---|
| 19 mm | PINSA019 | 500 | 112 |
| 25 mm | PINSA025 | 500 | 112 |
| 32 mm | PINSA032 | 500 | 96 |
| 42 mm | PINSA042 | 500 | 96 |
| 51 mm | PINSA051 | 500 | 96 |
| 63 mm | PINSA063 | 500 | 96 |
| 76 mm | PINSA076 | 500 | 63 |
| 105 mm | PINSA105 | 500 | 45 |
| 165 mm | PINSA165 | 250 | 45 |
|
|
|
|
|---|---|---|---|
| PINSA clip | PINSACLIP | 1000 | 96 |
| PINSA cap | PINSACAP | 1000 | 96 |